SHANGHAI FANGLING FLMC-F2500A CNC Plasma Cutting Controller
SHANGHAI FANGLING FLMC-F2500A CNC Plasma Cutting Controller
High stability FLMC-F2500A cnc plasma cutting controller
Model: FLMC-F2500A
Made in china.
Low cost CNC Plasma cutting machine used CNC controller.
Work Condition
Working Temperature, 0℃~50℃. Relative Humidity, 5~95%.
Operation Voltage: DC +24V.
The controller should be installed in a cab which can provide protection from powder.
The controller would be better used in the situation without high voltage radiation.
Characteristics
Compact keyboard design and easy to input files.
Shape have some operations such as Proportion, Rotate, and Mirror.
Shape can be arrayed in matrix, interaction, stacked modes.
Steel plate can be adjusted according to any steel side.
Coordinate system can be customized to support the two dimensional coordinates of all eight kinds.
All input and output port type and the number can be customized (normally open or normally closed).
Self-diagnostic function, to diagnose the key status and all the IO status, facilitate inspection and debug.
Provide a front USB interface for copying files.
System can be upgraded by USB interface easily, and we provide lifetime upgrade service.
All functions and techniques can upgrade online and don’t worry about the after sale service.
Import and export files by single or all files.
Parameters backup and parameter restore.
Support the Flame, Plasma, Marker and Demonstration four kinds of mode.
Including various types of processing parameters to meet the needs of different processes.
Flame and Plasma are separated in the control IO ports.
Support THC(Torch Height Control), two-level preheat, three-level pierce in flame mode.
Technical Indicator
Control Axis: 2 axis linkage(3 axis customizable)
Control accuracy: +/-0.001mm
Coordinate range: +/- 99999.99mm
Max pulses: 200 kHz. Max speed: 15,000 mm/m
Max lines of code: 80,000lines
Max size of single code file: 4M
Time resolution: 10ms
Working Voltage: DC +24V direct-current power input, power > 80W
Working Temperature: -10℃~+60℃. Relative Humidity, 0~95%.
Max power of drive arc THC motor: 45W (suitable for models with “T”). if need more power, can select maximum value: 200W.
System Interface
a) 15 pins SMA Male interface of 2 axes of motor drive.
b) 25 pins SMA Female interface of 16 channels optoelectronic isolation output ports max back flow current 300mA.
c) 25 pins SMA Male interface of 16 channels optoelectronic isolation input ports,max output current 300mA.
d) USB interface on the front panel, for the convenience of transmitting cutting code.
e) Extend IO input/output ports, PWM input ports, analog input ports.
The following three interfaces are only suitable for models with “T”:
f) Selection of partial pressure proportion of arc input: 1:50 or 1:100
g) 5 cores THC motor output and limit input ports.
h) 7 cores arc pressure and position input port, arcing signal output port.
F2500 A/B/T Hardware Configuration
1. Monitor : 17 inch high brightness LCD with industrial VGA interface
2. Memory: 64M SDRAM
3. Program space available for user: 256M
4. System master frequency: 400MHz
5. USB: USB 1.1 front interface, at least 16GB U disk supportable
6. Keyboard: PCB foil keyboard
7. Chassis: full-steel structure completely shielded which defends electromagnetic radiation, interference and static electricity